News

CAN installation from Jack Up rig

We installed our first CAN from a Jack Up rig this weekend for one of our international clients. This is Neodrill's first application...

September 5, 2022

New generation CAN-ductor with integrated TRAWL PROTECTOR (CTP)

Based on lessons learned from multiple CAN-ductor installations, Neodrill have been working closely with one of our key clients to create...

April 28, 2022

A half-year news review from our CEO Jostein Aleksandersen

A roundup of all Neodrill's news from the year so far.

July 19, 2021

Neodrill and Baker Hughes perform world's first cut and recover operation for Wintershall DEA Norge

Cut and recover allows the rig to leave the site as soon as the cement plugs are in place.

June 15, 2020

Neodrills Launches New Wellhead Saver System to Address Drift-Off

Wellhead Saver System (WSS) will redirect bending forces from the BOP away from the wellhead.

February 21, 2020

Neodrill enters Australian market with new Business Development Manager, Tim Dallas

Tim Dallas has almost 30 years experience in the oil and gas sector, with 17 years focused on the Australian and wider APAC region.

November 13, 2019

Neodrill announces new licence opportunities on pre-rig technology solutions for subsea templates

Neodrill, the innovators in pre-rig well construction technology through its CAN® technology, is pleased to announce new solutions for subse

April 4, 2019

World Oil article – ICON completes world's deepest CAN-ductor deployment and recovery

The world's deepest installation of a CAN-ductor well foundation has been completed.

October 11, 2018

Benefits of CAN recognised by Woodside

This video produced by Woodside illustrates how CAN can aid exploration drilling.

June 6, 2018

CAN-do approach over subsea technology

Article published in the Press & Journal.

December 13, 2017

JPT article - Conductor Anchor Node Adds Stability, Cuts Tophole Costs in Subsea Wells

When the industry discusses subsea wells, the tophole construction gets scant attention.

January 20, 2017

UTC2022 – June 15 and 16 at Grieghallen, Bergen

Conventional subsea single production well design requires the well to be drilled and completed with the drilling rig (vessel) before...

June 8, 2022

Neptune Energy Dugong Tail CAN-ductor recovery

The CAN-ductor used for the Dugong Tail well was recovered January 1st 2022. The recovery operation, from vessel arrival in the field...

January 5, 2022

Neodrill announces North Sea frame agreement with Lundin Energy Norway

Lundin has entered into a frame agreement for the use of the CAN-ductor technology on their Norwegian fields.

May 3, 2021

Environmental impact of top-hole activity reduced by 31% on Repsol’s Kathryn well

Neodrill’s CAN-ductor proves its green credentials again.

May 20, 2020

Neodrill continues team expansion with new Senior Project Engineer

We are pleased to announce that Rasmus Stølsmark has joined the Neodrill team as a Senior Project Engineer.

February 18, 2020

Neodrill and Siccar Point Energy announce ongoing partnership for Cambo well with optimization study

Optimisation study will investigate the CAN’s size relative to its load capacity.

August 29, 2019

Statement following Equinor settlement

We are pleased to have entered into a settlement with Equinor, ending the dispute over the validity of our patents for the CAN technology.

March 22, 2019

OSJ article – New drilling initiative completes subsea wellhead foundation

A new joint project has recently completed a ground-breaking subsea wellhead foundation contract in the Carnarvon Basin, writes Mark Pointon

August 13, 2018

Conductor Anchor Node (CAN) features on the cover of the AOG issue of Oil & Gas Australia

In conjunction with Australian Oil & Gas 2018 an image of the CAN has been featured on the front cover of Oil & Gas Australia.

January 23, 2018

CAN-ductor Assists World Record Well

The CAN-ductor was one of several technologies that enabled OMV to successfully drill and test the recent well, Wisting Central II.

October 13, 2017

Smart Well Foundation for Field Developments

A month ago, during the SPE Norway Subsurface Conference in Bergen, we presented a paper titled “Smart Well Foundation, the Cost...

June 1, 2022

Drilling well with zero discharge to sea

By combining Neodrill and Enhanced Drilling technologies zero discharge during drilling of subsea wells is possible. See short animation...

January 4, 2022

Neodrill announces projects with Neptune Energy

The projects represent Neodrill’s first and second 2-wells campaigns with Neptune Energy.

December 14, 2020

Neodrill launches all inclusive CAN-complete service as it announces partnership with Ross Offshore

CAN-complete will provide clients with a full service Engineering, Procurement, Construction and Installation (EPCI) solution.

April 29, 2020

Neodrill and InterMoor sign global cooperation agreement facilitating local project execution

Agreement will see InterMoor support Neodrill with local project execution and installation support.

December 9, 2019

Neodrill's CAN-ductor reduces environmental impact by up to 44% compared with conventional drilling

Reduced impact stems from a reduction in rig time and need for steel and cement in well casings.

June 26, 2019

New Business Development Manager, UK

As we enter the next phase of growth, we are delighted to welcome Martin Doig to the company as Business Development Manager, UK.

November 1, 2018

Court rule in favour of Neodrill in legal dispute with Equinor

On the 22nd June 2018, the court ruled in favour of Neodrill in recent litigation between Neodrill and Equinor.

June 23, 2018

Neodrill/ICON wins Woodside work

A Norwegian-Australian partnership has won its first Australasian contract.

January 23, 2018

JPT article – Conductor Anchor Node Optimizes Efficiency of Riserless Deepwater Exploration Drilling

The conductor anchor node (CAN) technology was introduced as part of the architecture for Centrica’s Ivory deepwater exploration well.

May 1, 2017